|
Product Details:
|
| Product Name: | SFP 1.25Gb/s BIDI 1490nm/1550nm 120km LC DDM SFP | Rate: | 1.25G |
|---|---|---|---|
| Wavelength: | 1490nm/1550nm | Distance: | 120km |
| Fiber Type: | SMF | Application: | Telecommunication, Gigabit Ethernet, FTTH FTTB FTTO Network, |
| Output Power: | 0~5dBm | Compatible: | Cisco, Huawei, HP, Finisar |
Miray’s SFP-1G-BX120U/D Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFB laser and the APD photo-detector. The module data link up to 120KM in 9/125um single mode fiber.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.
l Up to 1.25Gb/s data links
l DFB laser transmitter
l APD photo-detector
l Up to 120KM on 9/125µm SMF
l Hot-pluggable SFP footprint
l BIDI LC/UPC type pluggable optical interface
l Low power dissipation
l Metal enclosure, for lower EMI
l RoHS compliant and lead-free
l Single +3.3V power supply
l Support Digital Diagnostic Monitoring interface
l Compliant with SFF-8472
l Case operating temperature Commercial: 0°C to +70°C Extended: -10°C to +80°C Industrial: -40°C to +85°C
♦ Gigabit Ethernet
♦ Fiber Channel
♦ Switch to Switch interface
♦ Switched backplane applications
♦ Router/Server interface
♦ Other optical transmission systems
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
|
Case Operating Temperature |
Tcase |
0 | - | 70 | ºC | |
| -10 | 80 | ºC | ||||
| -40 | 85 | ºC | ||||
| Power Supply Voltage | VCC | 3.14 | 3.3 | 3.47 | V | |
| Power Supply Current | ICC | - | 300 | mA | ||
| Data Rate | BR | 1250/1250 | Mbps | TX Rate/RX Rate |
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Transmitter | ||||||
| Average Launched Power | PO | 0 | 5 | dBm | ||
| Average Launched Power(Laser Off) | Poff | - | - | -45 | dBm | |
|
Center Wavelength Range |
λC |
1470 | 1490 | 1510 | nm | |
| 1530 | 1550 | 1570 | nm | |||
| Spectrum Bandwidth(-20dB) | △λ | - | - | 1 | nm | |
| Side Mode Suppression Ratio | SMSR | 30 | dB | |||
| Extinction Ratio | ER | 9 | - | dB | Note (1) | |
| Output Eye Mask | Compliant with IEEE 802.3z | Note (2) | ||||
| Receiver | ||||||
|
Input Optical Wavelength |
λIN |
1530 | 1550 | 1570 | nm | |
| 1470 | 1490 | 1510 | nm | |||
| Receiver Sensitivity | Psen | - | - | -31 | dBm | |
| Input Saturation Power (Overload) | PSAT | -6 | - | - | dBm | |
| Los Of Signal Assert | PA | -45 | - | - | dBm | |
| Los Of Signal De-assert | PD | - | - | -31 | dBm | |
| LOS -Hysteresis | PHys | 0.5 | -2 | 6 | dB | |
Contact Person: Jenny
Tel: +8615012632309
