POE Module Wireless AP Bridge Network Camera 48V 0.5A POE Devices 

Description

This POE injector adapter connects to regular Ethernet cable on its one RJ45 connector and injects 48V/0.5A DC power on its output RJ45 connector. On Ethernet data POE injector acts as pass through device that mixes data and power on Ethernet cable. The devices requiring Power from Ethernet cable then can work by use of this POE Injector.

A great solution for poe devices and non-poe device(extra poe splitter will be required), the poe adapter can be used to power PoE devices(built-in poe function or module) such as IP Phone, IP cameras or Access Points etc. The device has a compact size, wall-mountable design makes it easy to install the adapter into areas where space is limited, no configuration required.

Application

1. POE Powered IP Cameras and surveillance devices

2. Arduino POE capable Ethernet Shields requiring Power over Ethernet

3. Custom Designed POE powered modules / devices such as remote sensors

Features​

1. Cost Saving, No Power Cabling for WLAN AP, IP Phone and any supported IEEE802.3af Powered Device
2. Meeting IEEE 802.3af/at standards and more sufficiently is able to provide power to PD devices
3. Small lightweight plastic enclosure
4. Built-in universal 100-240V AC switching power supply
5. Standard RJ45 Cat5 Ethernet data input and output
6. Easy, convenient, and simple to use

Technical Specification

Ordering Information

Application Environment