Product Details:
|
Product Name: | AOC-QSFP28-100G-3M 100G QSFP28 | Data Rate: | 100Gbps |
---|---|---|---|
Distance: | 3M | Application: | Telecommunication, Gigabit Ethernet |
Fiber Type: | OM3/OM4 MMF Cable | Operating Temperature: | 0°C To 70°C |
Compatible: | Cisco, Huawei, HP, Juniper | Warranty: | 3 Years |
High Light: | Round Multi Mode 100g aoc cable,100G Dell AOC Cable,3m Parallel Dell AOC Cable |
Miray’s QSFP28-100G-AOC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ SR4 for 100 or 40 Gigabit Ethernet , Infiniband FDR/EDR Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates Gigalight Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Parameter |
Conditions |
Min |
Typ. |
Max |
Units |
Data rate per lane |
8B/10BCoding, 64B/66B Coding |
1 |
|
26 |
Gbps |
3.3V Supply Voltage |
|
3.13 |
3.3 |
3.47 |
V |
Power supply noise including ripples |
1kHz to frequency of operation mersured at VCC_HOST |
|
|
50 |
mVpp |
Case temperature |
|
0 |
35 |
70 |
℃ |
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
Transmitter |
||||||
Centre Wavelength |
λc |
840 |
850 |
860 |
nm |
- |
RMS spectral width |
∆λ |
- |
- |
0.6 |
nm |
- |
Average launch power, each lane |
Pout |
-8.4 |
- |
2.4 |
dBm |
- |
Optical Modulation Amplitude (OMA),each lane |
OMA |
-6.4 |
|
3 |
dBm |
- |
Transmitter and dispersion eye closure(TDEC),each lane |
TDEC |
|
|
4.3 |
dB |
|
Extinction Ratio |
ER |
3 |
- |
- |
dB |
- |
Average launch power of OFF transmitter, each lane |
|
|
|
-30 |
dB |
- |
Eye Mask coordinates: X1, X2, X3, Y1, Y2, Y3 |
SPECIFICATION VALUES {0.3,0.38,0.45,0.35,0.41.0.5} |
Hit Ratio = 5x10-5 |
||||
Receiver |
||||||
Centre Wavelength |
λc |
840 |
850 |
860 |
nm |
- |
Stressed receiver sensitivity in OMA |
|
|
|
-5.2 |
dBm |
1 |
Maximum Average power at receiver , each lane |
|
|
|
2.4 |
dBm |
- |
Minimum Average power at receiver , each lane |
|
|
|
-10.3 |
dBm |
|
Receiver Reflectance |
|
|
|
-12 |
dB |
- |
Part No. | Product Type | Rate | Media Type | Wavelength | Reach | Commercial Temp. | Industrial Temp. |
QSFP28-100G-AOC1M | QSFP28 AOC | 40G | MM | 850nm | 1m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC2M | QSFP28 AOC | 40G | MM | 850nm | 2m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC3M | QSFP28 AOC | 40G | MM | 850nm | 3m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC5M | QSFP28 AOC | 40G | MM | 850nm | 5m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC7M | QSFP28 AOC | 40G | MM | 850nm | 7m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC10M | QSFP28 AOC | 40G | MM | 850nm | 10m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC20M | QSFP28 AOC | 40G | MM | 850nm | 20m | 0~70℃ | -40~85℃ |
QSFP28-100G-AOC30M | QSFP28 AOC | 40G | MM | 850nm | 30m | 0~70℃ | -40~85℃ |
Contact Person: Jenny
Tel: +8615012632309