Introducing the SDH STM-1/SONET OC-3 1.25G SFP Transceiver, a reliable and cost-effective solution for optical fiber communications applications. This SFP transceiver is compliant with SFF-8472 and supports DDMI. It is equipped with a 1550nm-DFB laser and operates over the temperature range of -40℃ ~+85℃, making it suitable for a wide range of applications. This transceiver is designed with an LC connector and provides up to 1.25Gbps data rate. It also supports digital diagnostic monitoring interface (DDMI) for real-time access to device operating parameters.
| Parameter | Value |
|---|---|
| Product Name | SDH STM-1/SONET OC-3 SFP Transceiver |
| Connector Type | Duplex LC Connector Interface |
| Laser | 1550nm-DFB |
| DDMI | YES |
| Pluggable | Hot Pluggable |
| Distance | 80km |
| Power Supply | Single 3.3V Power Supply And TTL Logic Interface |
| Data Rate | Operating Data Rate Up To 155.52 Mbps |
| Compliant | Compatible With SFF-8472 |
| Fiber Type | SMF |
| Wavelength | 1550nm |
| Temperature Range | -40℃ ~+85℃ |
| Connector | LC |
| Standard | SFF-8472 |
(1550nm FP and PIN, 80km)
| Parameter | Symbol | Min | Typ. | Max | Unit | Note | |
| Transmitter | |||||||
| Centre Wavelength | λc | 1530 | 1550 | 1570 | nm | ||
| Spectral Width*Note4 | ∆λ | 1 | nm | DFB-LD | |||
| Average Output Power | POUT | -5 | 0 | dBm | |||
| Extinction Ratio | ER | 10 | dB | ||||
| Average Power of OFF Transmitter | POFF | -45 | dBm | ||||
| Output Optical Eye | Compliant with eye mask Telcordia GR-253-CORE and ITU-T G.957 | ||||||
| Receiver | |||||||
| Centre Wavelength | λc | 1200 | 1650 | nm | |||
| Sensitivity*Note5 | PIN | -34 | dBm | ||||
| Receiver Overload | Overload | -10 | dBm | ||||
| Optical Return Loss | 12 | dB | |||||
| LOS Assert | LOSA | -45 | dBm | ||||
| LOS De-Assert | LOSD | -35 | dBm | ||||
| LOS Hysteresis | 0.5 | 4 | dB | ||||
The Trixon TSS-0380-55DIR SMF Optical Transceiver is a high performance and cost-effective module designed for single-mode fiber (SMF) applications at a 1310nm wavelength with a maximum reach of 10km. This transceiver has a duplex LC connector interface, and is capable of operating at a data rate of up to 155.52 Mbps. The device is equipped with Digital Diagnostic Monitoring Interface (DDMI) for real-time monitoring of the transceiver’s operating parameters. In addition, it has a wide operating temperature range of -40℃ ~+85℃, making it well-suited for the most demanding industrial environments. The Trixon TSS-0380-55DIR is an ideal solution for high-speed, long distance data transmission in a variety of applications, including enterprise and data center networks.
Data transmission rate: According to your needs, it can be customized to support different data transmission rates, such as 10Gbps, 25Gbps, 40Gbps, 100Gbps, etc.
Transmission distance: According to specific application requirements, it can be customized to support different transmission distances, such as short-distance transmission (such as hundreds of meters) or long-distance transmission (such as tens of kilometers or hundreds of kilometers).
Light source type: According to your requirements, different types of light sources can be customized, such as DFB (Distributed Feedback) laser, VCSEL (Vertical-Cavity Surface-Emitting Laser), etc.
Operating temperature range: According to the requirements of the application environment, the operating temperature range of the optical module transmitter can be customized to ensure normal operation within a specific temperature range.
Fiber optic connector type: Depending on your needs, different types of fiber optic connectors can be customized, such as LC (Lucent Connector), SC (Standard Connector), ST (Straight Tip), etc.
Special functions or requirements: If you have special functions or requirements, such as low power consumption, photoelectric conversion ratio, vibration and impact resistance, power monitoring, etc., you can discuss with the supplier and customize products that meet your needs.
We provide technical support and service for SFP Transciver Module. Our support team is available 24/7 to help you with any technical issues or questions you may have.
We offer a variety of services, including:
For more information about our technical support and services for SFP Transciver Module, please contact us.
Packaging and Shipping for SFP Transceiver Module:
All of our SFP Transceiver Modules are carefully packaged and shipped to ensure that they are protected during transit. The packaging is designed to protect the module from physical damage, dust, and moisture. The SFP module is packaged in a static-safe bag to protect it from electrostatic discharge. The static-safe bag is then placed into an anti-static foam box, which is then sealed in a hard plastic outer box with cushioning material.
The box is then packed into a cardboard shipping box, with additional cushioning material added for extra protection. All boxes are clearly labeled with the product name, part number, and weight. The shipping box is then ready to be shipped via the customer's preferred shipping method.
Reference Datasheet File code: DS110024
