3.125G SFP Bidirectional Transceiver is a type of transceiver module that is designed to provide high-speed data transmission and networking capabilities. It is designed with a single LC connector interface and single 3.3V power supply and TTL logic interface, which allow it to operate at data rates from 2.5 to 3.125 Gbps. It is suitable for 10km single mode transmission and supports DDMI (Digital Diagnostic Monitoring Interface) for enhanced monitoring and management. With its reliable performance and easy installation, it is the perfect choice for a wide range of applications that require high-speed and high-reliability data transmission.
| Technical Parameters | Value |
|---|---|
| Product Name | 3.125G SFP Bidirectional Transceiver |
| Wavelength | 1310nm/1550nm |
| Power Supply | Single 3.3V Power Supply And TTL Logic Interface |
| Connector Type | Single LC Connector Interface |
| Temperature Range | -40℃~+85℃ |
| DDMI | YES |
| Fiber Type | Single Mode |
| Pluggable | Hot Pluggable |
| Distance | 3km |
| Data Rates | Operating Data From 2.5~3.125 Gbps |
| Parameter | Symbol | Min | Typ. | Max | Unit | Note | ||
| Transmitter | ||||||||
| Centre Wavelength | λc | 1290 | 1310 | 1330 | nm | 1310nmTX/1550nmRX | ||
| 1530 | 1550 | 1570 | nm | 1550nmTX/1310nmRX | ||||
| Spectral Width*Note4 | ∆λ | 1 | nm | |||||
| Average Output Power | POUT | -9 | -3 | dBm | ||||
| Extinction Ratio | ER | 3.5 | 5.8 | dB | ||||
| 5 | 8 | |||||||
| Average Power of OFF Transmitter | POFF | -45 | dBm | |||||
| Output Optical Eye | Compatible with ITU-T G.957 | |||||||
| Receiver | ||||||||
| Centre Wavelength | λc | 1290 | 1310 | 1330 | nm | 1310nmTX/1550nmRX | ||
| 1530 | 1550 | 1570 | nm | 1550nmTX/1310nmRX | ||||
| Sensitivity*Note5 | PIN | -16 | dBm | |||||
| Receiver Overload | Overload | 0 | dBm | |||||
| LOS Assert | LOSA | -30 | dBm | |||||
| LOS De-Assert | LOSD | -17 | dBm | |||||
| LOS Hysteresis | 0.5 | dB | ||||||
Note4: VSCEL LD and FP LD measured spectral width RMS, DFB LD measured spectral width –20dB.
Note5: Minimum average optical power measured at the BER less than 1E-12@pattern is PRBS223-1@ER=10dB.
Telecommunications networks: The TSB-3G03-35DIR module is suitable for telecommunications networks, including long-haul or regional networks. It facilitates reliable bi-directional data transmission over a distance of 3 km, supporting voice, data, and video services.
Data center interconnects: In data center environments, this optical module can be used for interconnecting data centers or networking equipment. It enables high-speed bi-directional communication between data center locations, supporting data replication, backup, and disaster recovery applications.
Metropolitan Area Networks (MANs): The TSB-3G03-35DIR module can be deployed in MANs that connect various locations within a city or metropolitan area. It supports bi-directional transmission over a distance of 3 km, facilitating the exchange of data, voice, and video between different sites.
Industrial automation and control: In industrial settings, the optical module can be used for bi-directional communication in automation and control systems. It enables reliable transmission of control signals, monitoring data, and other critical information in harsh operating conditions.
Video surveillance and security: The TSB-3G03-35DIR can be deployed in video surveillance systems that require long-distance bi-directional communication. It facilitates the transmission of video data over a medium distance, supporting remote monitoring and surveillance applications.
Smart city infrastructure: The optical module can find applications in smart city deployments, where bi-directional communication is required for various sensors, devices, and infrastructure components. It supports data transmission and communication in smart transportation, energy management, and environmental monitoring systems.
Contact the manufacturer: Reach out to the manufacturer or supplier of the TSB-3G03-35DIR optical module and inquire about their customization capabilities. Provide them with detailed information about your specific requirements.
Specify your customization requirements: Clearly communicate your customization needs to the manufacturer. This may include desired specifications, performance parameters, form factors, temperature ranges, or any other specific features you require. The more detailed and specific you can be, the better the manufacturer can understand your needs.
Consult with the manufacturer: Engage in discussions with the manufacturer to explore the feasibility of your customization requests. They will be able to provide guidance, technical expertise, and recommendations based on their capabilities and experience. They can also advise you on any limitations or trade-offs associated with the customization.
Evaluate cost and lead time: Customization may involve additional costs and could impact lead times. Discuss these factors with the manufacturer to understand the pricing and production timeline associated with the customization. Consider the trade-offs between customization, cost, and time considerations.
Review and finalize: Once you have discussed and agreed upon the customization details, review the proposed specifications, pricing, and any other relevant factors. Ensure that both parties have a clear understanding of the customization scope before finalizing the order.
At [Company Name], we strive to provide the best possible service for our customers. We offer technical support and service for our SFP Transciver Module, to ensure that you get the most out of your purchase.
Our knowledgeable technical support team is available 24/7 to answer any questions or concerns you may have. We can help you troubleshoot any issues you may be having with your SFP Transciver Module, and provide advice on how to get the most out of your purchase.
We offer a comprehensive service package for our SFP Transciver Module, including repair and replacement services. Our certified technicians can help diagnose any problems you may have, and can replace or repair any defective components.
We also offer optional extended warranty packages, so you can rest assured that your SFP Transciver Module is covered for an extended period of time.
If you have any questions about our SFP Transciver Module technical support and service, please do not hesitate to contact us. Our friendly team will be more than happy to answer any questions you may have.
The SFP Transciver Module is packaged and shipped in a safe manner to ensure its quality. The module is placed in a cardboard box, along with the necessary accessories. The box is then sealed and secured with tape. The package is then shipped via a reliable carrier to the customer's address.
The package must be handled with care during transport. It should not be thrown around or exposed to any kind of abuse. The package should be stored in a cool, dry place away from direct sunlight and heat sources.
Upon receipt of the package, customers should inspect the contents and ensure that everything is in order. If any damages have occurred during transport, they should be reported to the carrier. Customers should also check the SFP Transciver Module for any signs of damage or defects before using it.
Reference Datasheet File code: DS100045
