1.25G STM-1/OC-3 Bi-directional SFP Transceiver
This SFP Transceiver Module is designed to meet the increasing demand for high capacity and high speed data transmission. It offers a high-performance, low-power 25G data link over a single mode fiber (SMF) with a transmission distance up to 15km. It adopts LC connector interface and supports hot-pluggable operation, making it easy for users to install and maintain. It is designed with a single 3.3V power supply and TTL logic interface, and is compliant to the SFP MSA standard and IEEE802.3. Furthermore, it is equipped with digital diagnostic monitoring interface (DDMI), which allows real-time monitoring of the module's operating parameters.
| Property | Value |
|---|---|
| Power Supply | Single 3.3V Power Supply And TTL Logic Interface |
| DDMI | YES |
| Data Rate | Operating Data Rate At 155.52Mbps |
| Wavelength | 1550nm/1310nm |
| Product Name | 1.25G STM-1/OC-3 Bi-directional SFP Transceiver |
| Pluggable | Hot Pluggable |
| Distance | 80km |
| Temperature Range | -40℃ ~+85℃ |
| Connector Type | Single LC Connector Interface |
| Fiber Type | SMF |
(1310nm/1550nm ,DFB/DFB and PIN, 80km)
| Parameter | Symbol | Min | Typ. | Max | Unit | Note | |
| Transmitter | |||||||
| Centre Wavelength | λc | 1280 | 1310 | 1340 | nm | 1310nmTX/1550nmRX | |
| 1530 | 1550 | 1570 | nm | 1550nmTX/1310nmRX | |||
| Spectral Width*Note4 | ∆λ | 1 | nm | DFB-LD | |||
| Average Output Power | POUT | -5 | 0 | dBm | |||
| Extinction Ratio | ER | 10 | dB | ||||
| Average Power of OFF Transmitter | POFF | -45 | dBm | ||||
| Output Optical Eye | Compliant with eye mask Telcordia GR-253-CORE and ITU-T G.957 | ||||||
| Receiver | |||||||
| Centre Wavelength | λc | 1510 | 1600 | nm | 1310nmTX/1550nmRX | ||
| 1280 | 1340 | nm | 1550nmTX/1310nmRX | ||||
| Sensitivity*Note5 | PIN | -35 | dBm | ||||
| Receiver Overload | Overload | -10 | dBm | ||||
| Optical Return Loss | 12 | dB | |||||
| LOS Assert | LOSA | -45 | dBm | ||||
| LOS De-Assert | LOSD | -35 | dBm | ||||
| LOS Hysteresis | 0.5 | 4 | dB | ||||
Note4: VSCEL LD and FP LD measured spectral width RMS, DFB LD measured spectral width –20dB.
Note5: Minimum average optical power measured at the BER less than 1E-10@pattern is PRBS223-1@ER=10dB.
Telecommunications networks: The module is suitable for long-haul or regional telecommunications networks where bi-directional communication is required over a distance of 80 km. It enables reliable data transmission in telecommunication infrastructure.
Data center interconnects: In data center environments, the TSB-0380-53DIR can be used for connecting data centers or networking equipment over medium to long distances. It facilitates high-speed data transmission between data center locations, supporting data replication, backup, and disaster recovery applications.
Metropolitan Area Networks (MANs): The optical module can be deployed in MANs, which connect various locations within a city or metropolitan area. It enables bi-directional communication over a distance of 80 km, supporting data, voice, and video transmission between different sites.
Wireless backhaul: The TSB-0380-53DIR is suitable for wireless backhaul applications, where it can be used to establish bi-directional communication links between cellular base stations or wireless access points over longer distances.
Utilities and infrastructure: It can be utilized in utility networks, such as power distribution or pipeline monitoring systems, where bi-directional communication is required over extended distances. The module enables reliable transmission of control signals, monitoring data, or other critical information.
Contact the manufacturer: Reach out to the manufacturer or supplier of the optical module and inquire about their customization capabilities. Provide them with your specific requirements and ask if customization options are available for the TSB-0380-53DIR module.
Specify your customization requirements: Clearly communicate your customization needs to the manufacturer. This may include desired specifications, performance parameters, form factors, or any other specific features you require. Provide as much detail as possible to ensure a thorough understanding of your needs.
Consult with the manufacturer: Engage in discussions with the manufacturer to explore the feasibility of your customization requests. They will be able to provide guidance, offer recommendations, or propose alternative solutions based on their expertise and capabilities.
Evaluate cost and lead time: Customization may involve additional costs and could impact lead times. Discuss these factors with the manufacturer to understand the pricing and production timeline associated with the customization. Consider the trade-offs between customization and cost considerations.
Review and finalize: Once you have discussed and agreed upon the customization details, review the proposed specifications, pricing, and any other relevant factors. Make sure all parties have a clear understanding of the customization scope before finalizing the order.
We offer technical support and services for our SFP Transceiver Module products. Our team of highly trained technical staff is available to answer any questions you may have about the product. We also provide installation and maintenance services, as well as troubleshooting and repair services. We strive to provide the best customer experience possible. If you have any questions or concerns, please don't hesitate to reach out to us.
Packaging and Shipping for SFP Transciver Module:
Reference Datasheet File code: DS100035
