|
Product Details:
|
| Product Name: | PoE Over Coaxial Extender Ethernet Over Coaxial Extender 600m | Data Rate: | 10/100Mbps |
|---|---|---|---|
| Transmission Distance: | 300m | RJ45 Port: | 1Ch RJ45 |
| BNC Port: | 1Ch BNC Connector | Working Temp.: | 0~70℃ |
Miray MR-1B1RP-T/R Ethernet over Coax Extender allows IP cameras to transmit over Coax cabling. It allows the system to extend IP cameras beyond cable distance limitations and also acts as a PoE inserter. The System transmits IP cameras over coax and can quickly turn any ordinary RG59U coaxial cable into a high speed network communication & PoE path. When operating over RG59U coaxial cable, the IP camera extender can operate for distances of up to 200 meters. MR-1B1RP-T/R Ethernet over Coax extender system consists of a transmitter and receiver which require very little installation time & absolutely no set up or configuration.
Features
1. Ethernet over Coax - Converts Ethernet UTP to transmit network data and PoE over standard coax cable.
2. Saves costs and time – Avoids rewiring and expense of traditional Ethernet UTP cable.
3. High data rate – Support 100 Base-T for high network bandwidth requirements of Mega-pixel cameras or multiple IP cameras.
4. Easy to install - No IP or MAC address configuration and other networking setup required.
5. Easy upgrade to IP - Converts existing analog CCTV system over coaxial cable to retrofit analog CCTV installations into IP Digital systems.
6. Extends standard Ethernet – Transmits10/100Base-T up to distances of 600 meters.
7. Compatible capability - Fully transparent to Ethernet networks and higher layer protocols.
|
Interface |
10/100Base-TX IEEE 802.3af(15.4W) RJ45 ×1 |
|
Transmission medium |
75-5 coaxial cable, RG59 |
|
LED Indicators |
PWR(Power supply) M/S(Links/Data) LRE(Trunk Links) POE(Power over Ethernet) L/A(Links/Data) |
|
Protocol standard |
IEEE 802.3i,IEEE 802.3u,IEEE 802.3x Flow Control,IEEE 802.3af DTE Power via MDI |
|
Data rate |
10/100Mbps |
|
Transmission distance |
1500M(No POE), 200~300M(with POE) |
|
Performance Specification |
Store-and-forward |
|
Network Latency |
Less than 20µs for 64-byte frames in Store and forwardmode for 100Mbps to 100Mbps transmission |
|
DC Power input |
DC 48V(Peak Value 44~56V) , NF-9801E-PD |
|
No power, NF-9801E-PSE |
|
|
Operating environment |
Operating temperature; -10℃~ +50℃ |
|
Dimension |
95*72*25mm |
| Part No. | Description |
| MR-1B1R-T/R | 10/100Mbps EOC Extender for IP Camera, 1 BNC port + 1 RJ45 port, distance to 1.5KM |
| MR-2B1R-T/R | 10/100Mbps EOC Extender for IP Camera, 2 BNC port + 1 RJ45 port, distance to 1.5KM |
| MR-4B1R-T/R | 10/100Mbps EOC Extender for IP Camera, 4 BNC port + 1 RJ45 port, distance to 1.5KM |
| MR-1B4R-T/R | 10/100Mbps EOC Extender for IP Camera, 1 BNC port + 4 RJ45 port, distance to 1.5KM |
| MR-1B1RP-T/R | 10/100Mbps POE EOC Extender for IP Camera, 1 BNC port + 1 RJ45 port, distance to 0.6KM |
| MR-1T1R-T/R | 10/100Mbps Ethernet over Twisted Pair Extender for IP Camera, 1 Twisted Pair port + 1 RJ45 port, distance to 1.5KM |
| MR-1T1RP-T/R | 10/100Mbps POE Ethernet over Twisted Pair Extender for IP Camera, 1 Twisted Pair port + 1 RJ45 port, distance to 0.6KM |
For more details, welcome to inquire us freely.
Contact Person: Jenny
Tel: +8615012632309
