|
Product Details:
|
| Product Name: | 10GBASE-T SFP+ Copper RJ45 30m SFP Module | Data Rate: | 10Gb/s |
|---|---|---|---|
| Transmission Distance: | 30m | Connector: | RJ45 |
| Compatible: | Cisco,IBM,huawei,HP,Finisar | Application: | Telecommunication,FTTH FTTB FTTO Network |
| Warranty: | 3 Years | Operating Temperature: | 0 °C ~ 70 °C |
| High Light: | TX Disable Function Copper SFP Module,Full Duplex Copper SFP Module,juniper 10g copper sfp |
||
Miray’s SFP-10G-T Copper Small Form Pluggable Plus (SFP+) transceivers is high performance, cost effective module compliant with the 10 Gigabit Ethernet and 10G BASE-T standards as specified in IEEE 802. 3-2015 and IEEE 802.3an, which supporting 10Gbps data-rate up to 30 meters reach over shielded twisted-pair category 6A cable. The module supports 10Gbps full duplex data-links with 16-level Pulse Amplitude Modulation (PAM) signals. The module provides standard serial ID information compliant with SFP+ MSA, which can be accessed with address of A0h via the 2wire serial bus. The physical IC can also be accessed via 2wire serial bus at address ACh.
Features
| Low-Speed Signals, Electronic Characteristics | |||||
| Parameter | Symbol | Min | Max | Units | Notes/Conditions |
| SFP+ Output LOW | VOL | 0 | 0.5 | V | 4.7k to 10k pull-up to host_Vcc, measured at host side of connector |
| SFP+ Output HIGH | VOH | host_Vcc - 0.5 | host_Vcc + 0.3 | V | 4.7k to 10k pull-up to host_Vcc, measured at host side of connector |
| SFP+ Input LOW | VIL | 0 | 0.8 | V | 4.7k to 10k pull-up to Vcc, measured at SFP side of connector |
| SFP+ Input HIGH | VIH | 2 | Vcc + 0.3 | V | 4.7k to 10k pull-up to Vcc, measured at SFP side of connector |
|
High-Speed Electrical Interface Transmission Line-SFP+ |
||||||
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Notes/Conditions |
|
Line Frequency |
fL |
|
800 |
|
MHz |
16-level encoding, per IEEE 802.3 |
|
Tx Output Impedance |
Zout,TX |
|
100 |
|
Ohm |
Differential, for all Frequencies between 1MHz and 800MHz |
|
Rx Input Impedance |
Zin,RX |
|
100 |
|
Ohm |
Differential, for all Frequencies between 1MHz and 800MHz |
|
General |
||||||
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Notes/Conditions |
|
Data Rate |
BR |
1 |
|
10 |
Gbps |
IEEE 802.3 compatible. See Notes 2 through 4 below |
|
Cable Length |
L |
|
|
30 |
m |
Category 6A STP. BER <10-12 |
|
Part Number |
Chipset |
Form Factor |
Application |
Media Type |
Distance |
|
SFP-10G-T |
Marvell 88X3310 |
SFP+ |
10G |
Copper |
30m |
|
SFP-10G-T80 |
Broadcom BCM84891 |
SFP+ |
10G |
Copper |
80m |
|
SFP-GE-T |
Marvell 88E1111 |
SFP |
1G |
Copper |
100m |
|
SFP-GE-T10/100/1000 |
Marvell 88E1112 |
SFP |
1G |
Copper |
100m |
For more details, welcome to inquire us freely.
Contact Person: Jenny
Tel: +8615012632309
