|
Product Details:
|
| Product Name: | 10/100M Single Port PoE Injector 15W 48VDC | Data Rate: | 10/100Mbps |
|---|---|---|---|
| Power: | 15W | Standard: | IEEE802.3af |
| Pin Assignment And Polarity: | 1/2(+), 3/6 (-) | Input Power AC Voltage: | 100~240 VAC |
| Warranty: | 3 Years | ||
| High Light: | IP Camera single port poe injector,15W RJ45 Ports POE Devices,48VDC Injector POE Devices |
||
Miray MR-P15 is a Power over Ethernet Injector with one Ethernet Input (data only) port and one Output (data + power) port that is designed for small or medium network environments. This product can convert standard 100~240V/AC power into lowvoltage DC that runs over existing LAN cable to power up IEEE 802.3af compliant network accessories. It also features PoE awareness to verify whether the network device receiving power or only the data will be sent through LAN cable. By adding a PoE Splitter to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators don’t need to use AC power adapters anymore.
routers, switches, wireless APs, network telephones, industrial network terminals or IP cameras, massager, sos telephone, fetal monitor equipment, robot
|
Product Model |
MR-P15 |
|
Port Description |
2x copper cable RJ45 ports, 1x AC input port |
|
PoE Power Supply |
end-span: 1/2,3/6 spare line pair (default); mid-span: 4/5, 7/8 data line pair(can be customized) |
|
Network Medium |
100BASE-TX: 5Cat and more UTP (≤100 meters) |
|
Thermal Protection |
>100°C |
|
Performance |
Working rate:10/100Mbps working rate |
|
Network port protection: meet with IEC61000-4-2(ESD) |
|
|
MTBF: 100,000 hours |
|
|
PoE Standards |
IEEE 802.3at/af |
|
LEDs Indicator |
PoE working status |
|
Power |
Total power: 15W |
|
PoE port power: 15W |
|
|
AC input voltage: 110~220V |
|
|
Output voltage: 48-52V |
|
|
Working Environment |
Operating Temperature: -20°~ 55°C , Storage Temperature: -20°~ 75°C |
|
Working Humidity: 10%~90%, non-condensing Storage Humidity: 10%~95%, non-condensing |
|
|
Warranty |
CE mark,commercial,FCC Part 15 Class B,RoHS |
|
2 years warranty |
|
Part Number |
Description |
|
MR-P15 |
10/100M POE injector, 1 POE in, 1 POE out, 48V, 15W |
|
MR-15G |
10/100/1000M POE injector, 1 POE in, 1 POE out, 48V, 15W |
|
MR-P30 |
10/100M POE injector, 1 POE in, 1 POE out, 48V, 30W |
|
MR-P30G |
10/100/1000M POE injector, 1 POE in, 1 POE out, 48V, 30W |
|
MR-P60G |
10/100/1000M POE injector,1 POE in, 1 POE out, 48V, 60W |
Installation Diagram: Non PoE Switch/Router to PoE PD
Installation Diagram: Non PoE Switch/Router to Non-PoE PD
Contact Person: Jenny
Tel: +8615012632309
