|
Product Details:
|
| Product Name: | Gigabit 60W POE Injector 48V 10/100/1000M | Data Rate: | 10/100/1000Mbps |
|---|---|---|---|
| Power: | 60W | Standard: | IEEE802.3bt |
| Pin Assignment And Polarity: | 1/2(+), 3/6 (-) | Input Power AC Voltage: | 100~240 VAC |
| Warranty: | 3 Years | ||
| High Light: | 48V Channel Power POE Devices,poe injector 48v 60w,1000 Mbps POE Devices |
||
Miray MR-P60G is a Gigabit Power over Ethernet Injector with one Ethernet Input (data only) port and one Output (data + power) port that is designed for small or medium network environments. The MR-P60G supplies remote power for new applications such as wireless access points, pan-tilt-zoom (PTZ) IP cameras and videophones. It complies with IEEE 802.3bt PoE standard. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as Wi-MAX and wireless IEEE 802.11n access points. By adding a PoE Splitter to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators don’t need to use AC power adapters anymore. For all the function featured in MR-P60G, people can get the benefit of flexible network installation at lower cost, less downtime.
|
Item |
Description |
|
No. of Ports |
1 |
|
Pass Through Data Rates |
10/100/1000 Mbps |
|
Power over Ethernet Output |
Pin Assignment and Polarity: 1/2 (-), 3/6 (+),4/5 (+), 7/8 (-) Output Power Voltage: 50Vdc User Port Power: 60W |
|
Input Power Requirements |
AC Input Voltage: 100 to 240 Vac AC Input Current: 1A 100-240 Vac AC Frequency: 50 to 60 Hz |
|
Dimensions |
145mmx60mmx40mm |
|
Indicators |
System Indicator: AC Power User Indicator: Channel Power |
|
Connectors |
Shielded RJ-45, EIA 568A and 568B |
|
Environmental Conditions |
Operating Ambient Temperature:0 to 45℃ Operating Humidity: Maximum 80%, Non-condensing Storage Temperature:-20 to 70℃ Storage Humidity: Maximum 80%, Non-condensing |
|
Regulatory Compliance |
IEEE 802.3af (15.4W) IEEE 802.3at (30W) IEEE802.3at 4Pairs(60W) |
|
Part Number |
Description |
|
MR-P15 |
10/100M POE injector, 1 POE in, 1 POE out, 48V, 15W |
|
MR-15G |
10/100/1000M POE injector, 1 POE in, 1 POE out, 48V, 15W |
|
MR-P30 |
10/100M POE injector, 1 POE in, 1 POE out, 48V, 30W |
|
MR-P30G |
10/100/1000M POE injector, 1 POE in, 1 POE out, 48V, 30W |
|
MR-P60G |
10/100/1000M POE injector,1 POE in, 1 POE out, 48V, 60W |
Installation Diagram: Non PoE Switch/Router to PoE PD
Installation Diagram: Non PoE Switch/Router to Non-PoE PD
Contact Person: Jenny
Tel: +8615012632309
