|
Product Details:
|
| Product Name: | Managed Industrial Gigabit Ethernet Switch 8 Ports RJ45 1 SFP Port | Data Rate: | 1000Mbps |
|---|---|---|---|
| Fiber Port: | 2*1000M SFP Port | RJ45 Ports: | 8*10/100/1000M Port |
| Function: | LACP, QoS, SNMP, VLAN Support | Working Temperature: | -40°~ +85°C |
| High Light: | Wall Mounting Industrial Gigabit Ethernet Switch,Auto MDIX Industrial Gigabit Ethernet Switch,LACP managed industrial ethernet switch |
||
MR-IM2G8TP-SFP Serie is a new generation industrial Managed switch with 8-Port 10/100/1000Base-T and 2-Port 1000Base-X SFP that provide stable and reliable Ethernet transmission offered by E-link, with high quality design and reliability. It is positioning in the broadband network intervention market, to offer and realize Ethernet data exchange, convergence and long-distance optical transmission with efficient bandwidth and reliable fiber optic network solutions for users. The industrial switch complies with various characteristics such as mini size, no fan, low power consumption, high reliability and stability, and easy to maintain.
With dual power input design, MR-IM2G8TP-SFP can offer redundant mechanisms for critical applications that need always-on connections. It can also operate either at standard operating temperature range -40 to 80°C. Housed in rugged DIN rail or wall mountable IP40 enclosures, these switches are perfect choices for harsh environments, such as industrial networking, intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications.
· 8x10/100/1000Base-T + 2x1000Base-X SFP ports
· Support Auto-MDIX, and full/half duplex self-negotiation mode
· Provide SC/FC/ST/LC interface fiber port, support single/dual fiber transmission
· Support 16K bytes giant frame, compatible with various extension protocol
· 8K MAC address table
· Support IEEE802.3az energy efficient Ethernet technology
· Support IPv6 Protocol
· Electric 4KV surge protection, easy to use in outdoor environment
· Complete status indicator, working state at a glance
· Power input polarity protection design, no worry about wrong operation
· Metal case, no fan design
· Installation method: DIN trail /Wall mounting
· DHCP RFC 1541, 1542
|
Product |
|
|
Copper Ports |
8-10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
|
SFP/mini-GBIC Slots |
2-1000BASE-SX/LX/BX SFP interfaces (Port-5 to Port-6) Compatible with 100BASE-FX SFP |
|
Performance Specification |
Bandwidth: 56 Gbps |
|
Installation |
DIN rail kit and wall mount ear |
|
Maximum Frame Size |
1522bytes packet size |
|
Flow Control |
Back pressure for half duplex, IEEE 802.3x pause frame for full duplex |
|
Enclosure |
IP40 slim type metal case |
|
LED Indicator |
Power: Red Ethernet: Yellow POE: Green |
|
Power Input |
12 to 52V DC redundant power POE :48-57V DC |
|
Power Consumption |
3 watts / 10BTU (maximum) |
|
Protection |
ESD (Ethernet): 6KVDC Surge (Power): 6KVDC |
|
Network Protocols |
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u;100Base-TX/FX; IEEE802.3z 100Base-X; IEEE802.3ab 1000Base-T; IEEE802.3x; IEEE 802.3ad port trunk with LACP ; IEEE 802.1D Spanning Tree Protocol (STP); IEEE 802.1w Rapid Spanning Tree Protocol (RSTP); IEEE 802.1s Multiple Spanning Tree Protocol (MSTP); IEEE 802.1p Class of Service; IEEE 802.1Q VLAN tagging; IEEE 802.1ad Q-in-Q VLAN stacking; ITU G.8032 ERPS Ring; |
|
Network cables |
10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤10meter) 1000BASE-TX: Cat6 or later UTP(≤100 meter) |
|
Industry Standard |
FCC CFR47 Part 15,EN55022/CISPR22, Class A EMS: IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air) IEC61000-4-3 (RS): 10V/m (80MHz-2GHz) IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz) IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s) |
Application
Contact Person: Jenny
Tel: +8615012632309
