|
Product Details:
|
| Product Name: | 1000BASE-LX 1.25G SFP Transceiver Module | Rate: | 1.25Gbps |
|---|---|---|---|
| Connector: | Duplex LC | Wavelength: | 1310nm |
| Distance: | 20km | Fiber Type: | SMF |
| Application: | Telecommunication, Gigabit Ethernet, FTTH FTTB FTTO Network, | Warranty: | 3 Years |
| High Light: | 1000base lx sfp cisco,LC cisco sfp sm,Sm 1000base lx sfp cisco |
||
The small form-factor pluggable (sfp transceiver ) is a compact, hot-pluggable transceiver used for both telecommunication and data communications applications. The form factor and electrical interface are specified by a multi-source agreement (MSA). It interfaces a network device motherboard (for a switch, router, media converter or similar device) to a fiber optic or copper networking cable. It is a popular industry format jointly developed and supported by many network component vendors.
1. Multi-sourced SFP package with dual LC/PC receptacles
2. Single mode dual fibers transmission
3. Up to 20Km with 9/125μm SMF
4. AC coupled for Rx and Tx side
5. Two temperature ranges: 0°C to +70°C for commercial level, -40°C to +85°C for industrial level
6. operates at data rate 1000Mbps
7. Complies with lots of brands of switch such as h3c…….
8. Low power consumption and high sensitivily
9. Can be with or without DDM
10.Complies with SFP Multi-Source Agreements standards (MSA)
11.Complying with Class 1 Laser,and the requirements of IEC60825-1
| Parameter | Symbol | Min. | Typical | Max. | Unit | |
| Case operating Temperature | Industrial | TC | -40 | 85 | °C | |
| Extended | -5 | 85 | °C | |||
| Commercial | 0 | +70 | °C | |||
| Supply Voltage | VCC | 3.135 | 3.465 | V | ||
| Supply Current | Icc | 300 | mA | |||
| Inrush Current | Isurge | Icc+30 | mA | |||
| Maximum Power | Pmax | 1 | W | |||
| Parameter | Symbol | Min. | Typical | Max. | Unit | Note |
| Transmitter Section: | ||||||
| Center Wavelength | λc | 1270 | 1310 | 1360 | nm | |
| Spectral Width(RMS) | σRMS | 3 | nm | |||
| Optical Output Power | Pout | -9 | -3 | dBm | 1 | |
| Extinction Ratio | ER | 8.2 | dB | |||
| Optical Rise/Fall Time | tr / tf | 260 | ps | 2 | ||
| Relative Intensity Noise | RIN | -120 | dB/Hz | |||
| Output Eye Mask | Compliant with IEEE802.3 z (class 1 laser safety) | |||||
| Receiver Section: | ||||||
| Optical Input Wavelength | λc | 1260 | 1360 | nm | ||
| Receiver Overload | Pol | -3 | dBm | 4 | ||
| RX Sensitivity | Sen | -24 | dBm | 4 | ||
| RX_LOS Assert | LOS A | -35 | dBm | |||
| RX_LOS De-assert | LOS D | -25 | dBm | |||
| RX_LOS Hysteresis | LOS H | 0.5 | dB | |||
| General Specifications: | ||||||
| Data Rate | BR | 1.25 | Gb/s | |||
| Bit Error Rate | BER | 10-12 | ||||
| Max. Supported Link Length on 9/125μm SMF@1.25Gb/s | LMAX | 20 | km | |||
| Total System Budget | LB | 15 | dB | |||
Contact Person: Jenny
Tel: +8615012632309
